nano tag Activity Measuring Device

Wireless Temperature and Activity Measurement

Item Product Price QTY
56747 nano tag for Mice and Rats (20/pk) requires 56745S and 56748 Login
56746 nano tag for Mice and Rats (10/pk) requires 56745S and 56748 Login
56745 nano tag for Mice and Rats (5/pk) requires 56745S and 56748 Login
56745S nano tag Viewer Software Login
56748 Contactless RFID card reader/writer "PaSoRi" (cable) Login
56745D nano tag for Mice and Rats Demo Set with Software Login

Continuous monitoring of activity and temperature up to 60 days!

Record from multiple animals simultaneously

Animals can be implanted with a nano tagTM device and activity and temperature data can be collected from all of them at the same time.

Continuously record for up to 60 days*

The nano tagTM internal battery will last for up to 2 months. Data can be recorded not only continuously but also intermittently for 60 days by turning on/off the power externally. Additionally, “timer stop mode” enables you to set up the device so that it will start/stop recording automatically at designated times.

* The battery life (60 days) is based on 24-hour measurement with a single 2 min/day communication for retrieval of data. Battery life is dependent on a number of factors pertaining to use.

FeliCaTM communication

Recorded data are stored in the nano tagTM device. Stored data is retrieved into your PC by FeliCaTM communication. A simple, light touch of the RFID card reader/writer(PaSoRiTM) on the nano tagTM, can be used to start/stop data recording. Recorded data is retrieved while the nano tagTM is implanted in animal body*.

Antenna surface

      

Battery surface

Small and Lightweight

The nano tagTM is smaller than a dime (18.8mm dia.) and weights only 2.7g (including the battery). To make it lightweight and waterproof, nano tag® is a single-use device or disposable. The battery is unreplaceable.

Activity measuring method

Activity is defined as Cross Count Data.

[ Cross Count ]
Counts the number of times XYZ acceleration vector synthesized waveform crosses the threshold levels from bottom to top per Recording Interval(Cross Count).

ActWaveE

Recording Modes

The following 3 modes are available.

  • “Loop mode” – Overwrite existing data from the beginning when the memory becomes full
  • “Memory – full stop mode” – Data is stored sequentially until the memory becomes full
  • “Timer start/stop mode” – Start/stop at designated times

 nano tag® Viewer Software “nanotag/Viewer”

The nanotag/Viewer enables you to change the setting, retrieve data, make a graph, and output to a CSV data file.

  • Change settings of nano tagTM
  • Control start/stop of data acquisition
  • Retrieve data, Reset
  • Make graphs
  • Output to CSV data files

nano tagTMviewer software
This software is necessary to use nano tagTM

Specifications

Detection method Three-axis accelerometer, Temperature sensor
Communication system Near Field Communication (FeliCaTM system)
Communication distance Approximately 10mm
Time accuracy ±60 seconds / month
Internal battery CR1220 (unreplaceable)
Battery life Approximately 2 months (under 24-hour measurement with a single 2 min/day communication for retrieval of data using FeliCaTM)
Recording mode 1. Loop mode
2. Memory - full stop mode
3. Timer start/stop mode
Activity data Cross Count
Temperature 10 - 45.875℃
Measurable temperature range : 15.875℃
(Resolution : 0.0625℃ Accuracy : ±0.5℃)
Waterproof Equivalent to IPX7 ( IEC529)
Material ABS, Epoxy
Size 18.8 X 14.2 X 7.1 mm
Weight Approximately 2.7g
 

Sensor:  3-axes Accelerometer

Communication:  NFC

Time Accuracy:  Monthly difference +/- 60sec

Battery:  CR1220

Battery Life:  60 days

Measurement mode:  Loop, Memory-Full Stop, Timer